"The job they did for me went very well.
Very professional service, very well done. Everything went smooth. I will be contacting them next year!"
— David R.
"I had a patio done. They did really great work. Thank you."
— Kathy M.
"On time, on budget, and did a great job.
I never even saw them!"
— J Rudov
"Best driveway work by JR. They are trusted and very meticulous with their work.
— Dawn H.
Residential & Comercial paving company serving the Western Pennsylvania and the Tri-State Area
JR Paving & Construction Co Inc is a full-service paving company that takes pride in providing quality services to our customers. Our experienced paving contractors handle each job as if it's their only job. With more than 50 years of paving experience, we can handle a wide range of services for both residential and commercial customers.
Whether you are in need of new paving, or maintenance and repair, you have come to the right place. We provide asphalt and paving services throughout Western Pennsylvania and the surrounding Tri-State Area. If you are looking for asphalt paving construction and repair services you can count on, give us a call today.
Asphalt Chip Sealing Services in Mount Lebanon
Professional paving installation and maintenance will keep your pavement looking great. As a fully insured and licensed paving company serving Western Pennsylvania and Tri-State Area, JR Paving & Construction Co., Inc. provides quality paving services for your commercial or residential property. We handle all aspects of paving construction, including parking lots, driveways, and roads. With more than 50 years of paving experience, the work that we do is of a high quality so you don't have to worry about getting it re-paved anytime soon!
Asphalt Sealing, or sealcoating, is simply the process of laying a thin protective layer over asphalt-based pavement to give it a protective layer of protection against the elements: oil, water, and U.V. The positive effects of asphalt sealing have long been debated. Some claim that asphalt sealing increases the lifespan of the pavement, but again, there’s no evidence that backs up those claims. In fact, asphalt sealing can actually damage the pavement by creating cracks. The excessive water and oil that can be soaked into the asphalt also weaken its structural integrity. And, the chemical fumes emitted during asphalt sealing can also be harmful to humans.
With all of that in mind, it’s not surprising that a lot of business owners, when they set out to perform asphalt sealing, opt to go the non-per square foot route. For one thing, the costs are much lower, often no more than a few cents per square foot. And, the benefits of lower cost and improved performance are well-known. After all, if you want to save money, you want to reduce your operation costs, right?
But that brings us to our next question: Are asphalt sealing pads a good solution for parking lots, blacktop driveways, or other paved surfaces? As with any typical maintenance procedure, regular maintenance is the best way to reduce the cost of asphalt sealing. Sealing at least annually, will help keep dust, pollen, and other pollutants from making their way onto your paved surfaces. It will also help protect your driveway from water damage, as well as mold and algae growth, both of which cause a lot of problems to homeowners.
Now let’s take a look at how often you should reseal your asphalt surfaces, especially if you’re going to go the non-per square foot route. The key, again, is regular maintenance. And as it turns out, the best time to perform asphalt sealing and resealing is during the cold winter months. In fact, there’s even been some recent evidence suggesting that the best time for asphalt sealing and resealing is during the fall, when temperatures are quite low.
Why is that? It’s because fall is when most asphalt-based park finishes and protective coatings need to be applied. Asphalt-based park finishes are very weather-resistant, but that doesn’t mean that they’re impervious to the elements. In fact, the rainy spring weather can still cause problems, as can heavy snow, ice, and even dew. So, by applying the protective coatings only during the wet winter months, you’ll be doing your park and business no favors, and in the end, your asphalt sealing and resealing efforts will be wasted.
Here’s why: Asphalt seal coats are extremely dense. Think about asphalt sealing and resealing – it’s the same product, just in a different form. And, that means that you have to apply a lot less of it to achieve the same degree of protection. That’s why a lot of asphalt maintenance and repair companies (which specialize in asphalt sealing and resealing) will advise you to apply a minimum of three or four gallons of asphalt-base protectant per square foot of paved area. In other words, if you have a parking lot of ten thousand square feet, you’d want to apply three gallons per every twenty-five feet of paved area.
If you were to apply that kind of service to your own asphalt driveway, you could expect to pay anywhere from three to five dollars per square foot. Now consider that the average cost of asphalt sealing and resealing is only about two or three dollars per square foot. Multiply those two by the number of feet of asphalt you’re going to need to cover (per your parking lot, for example), and you quickly come to understand how much asphalt sealing and resealing would cost you. Applying the service yourself would cost you at least a thousand dollars or more. Not very appealing, I’d say.
But, don’t give up just yet – there are other ways to protect your asphalt driveway sealcoating and resealing investment, and they won’t cost you nearly as much, so don’t rule them out just yet. One of those ways is called flashings, which are like raised bumps along the edge of your driveway that will serve as an additional traction aid when you drive over it. The average cost of installing these would be about two hundred dollars, with the total installed cost running into the thousands. Another less expensive alternative is a thin film of asphalt seal coating that has a plastic protective layer between it and the ground, as opposed to flashing. It’s about as thick as standard asphalt, which would then have to be applied to your asphalt driveway sealcoating and resurfacing project in much the same way.
Satisfaction Guaranteed / Work Guaranteed
With more than 50 years in business, we know a thing or two about customer service. We are dedicated to providing our customers with quality paving services that can't be beaten. You can trust in our service and experience to complete your job, no matter how big or small.
We provide paving services throughout the surrounding Western Pennsylvania and Tri-State Area.
Why would you not want to seek paving services from one of the top paving companies in Western Pennsylvania and Tri-State Area? Call JR Paving and Construction Co., Inc. today at (888) 497-3391 for a FREE estimate for your paving needs.
About Mount Lebanon, PA
Mount Lebanon is mentioned in the Old Testament numerous times. King Hiram I of Tyre sent engineers with Cedar wood which was abundant in Mount Lebanon, to build the Jewish Temple of Jerusalem. Since then the Cedar species known scientifically as Cedrus libani is often associated with Mount Lebanon. The Phoenicians used cedar to build ships in which they sailed the Mediterranean, thus they were the first to establish villages in Mount Lebanon and would live from cutting down Cedars and sending them to the coast.
Eusebius records that the Emperor Constantine destroyed a temple of Venus 'on the summit of Mount Lebanon.'
After the 5th century AD, Christian monks who were followers of a hermit named Maron, arrived from the Orontes valley in Northern Syria and began preaching their religion to the inhabitants of the northernmost parts of the mountain range. In the late 8th century a group known as the Mardaites (also Jarajima) settled in North Lebanon following the order of the Byzantine Emperor; their mission was to raid Islamic territories in Syria. They merged with the local population, refusing to leave after the emperor struck a deal with the Muslim Caliph of Damascus; thus, they became part of the Maronite society. In 1291 after the fall of Acre, the last crusader outpost in the Levant, the remnants of the European settlers who succeeded in escaping capture by the Mamelukes, settled in the Northern part of Lebanon and become part of the Maronite society.
In the 9th century AD, tribes from the "Jabal el Summaq" area north of Aleppo in Syria began settling the southern half of the mountain range. These tribes were known as the Tanoukhiyoun and in the 11th century they converted to the Druze faith and ruled the areas of Mount Lebanon stretching from Metn in the north to Jezzine in the south. This entire area became known as the ‘Jabal ad-Duruz’. In the early 17th century, Emir Fakhr-al-Din II ascended the throne in the Druze part of the mountains known as the Chouf. In an effort to unify Mount Lebanon, Emir Fakhreddine opened the door to Christians and in particular the Maronite settlement of the Chouf and Metn.
Throughout the 18th century and into the 19th century more and more Maronites settled in the Druze regions of the Mount. The Druze viewed these Maronite settlements as a threat to their power in Mount Lebanon and in a series of clashes in the 1840s and 1860s, a miniature civil war erupted in the area resulting in the massacre of thousands of Christians. The Druze won militarily, but not politically, because European powers (mainly France and Britain) intervened on behalf of the Maronites and divided Mount Lebanon into two areas; Druze and Maronite. Seeing their authority decline in Mount Lebanon, a few Lebanese Druze began migrating to the new Jabal ad-Duruz in southern Syria. In 1861, the "Mount Lebanon" autonomous district was established within the Ottoman system, under an international guarantee.
For centuries, the Maronites of the region have been protected by the noble Khazen family, which was endowed the responsibility by Pope Clement X and King Louis XIV and given Cheikh status in return for guarding the princes Fakhr-al-Din II and Younès al-Maani. The Khazen crest reflects the family's special closeness to Mount Lebanon, with snowy mountains and a cedar tree depicted.
The Mount Lebanon range extends along the entire country for about 170 km (110 mi), parallel to the Mediterranean coast. Their highest peak is Qurnat as Sawda', at 3,088 m (10,131 ft). The range receives a substantial amount of precipitation, including snow, which averages around 4 m (13 ft) deep.
Lebanon has historically been defined by the mountains, which provided protection for the local population. In Lebanon, changes in scenery are related less to geographical distances than to altitudes. The mountains were known for their oak and pine forests. The last remaining old growth groves of the famous Cedar of Lebanon (Cedrus libani var. libanii) are on the high slopes of Mount Lebanon, in the Cedars of God World Heritage Site.
The Phoenicians used the forests from Mount Lebanon to build their ship fleet and to trade with their neighbors. The Phoenicians and successor rulers consistently replanted and restocked the range; even as late as the 16th century, its forested area was considerable.